Share:


F-4173 Series Filter Discs



Industrial Filtration Components

F-4173 Series Filter Discs

The F-4173 Series Filter Discs are compact, recleanable stainless steel filtration elements supplied by Canglobal (M) Sdn Bhd for industrial equipment protection and contamination control. Manufactured by Norman Filter Company, these pleated filter discs provide last-chance filtration for critical components, with an operating pressure rating of 6,000 PSI and multiple micron ratings.

Designed to help prevent contaminants from reaching sensitive valves, gauges and other control components, the F-4173 Series combines a lightweight disc format with pleated stainless steel filter media. It is a practical choice for suitable in-line, valve insert and manifold applications where compact filtration and equipment protection are important.

6,000 PSI Published operating pressure rating
Pleated Design Recleanable stainless steel filter media
2–200 Micron Listed nominal filtration ratings, depending on selected micron code

Product Features & Filtration Benefits

Compact Stainless Steel Filtration for Critical Components

The F-4173 filter discs are designed for last-chance filtration at critical points within industrial equipment. Their pleated structure provides greater filtration surface area than a comparable simple flat disc, helping capture contaminants before they reach sensitive downstream components.

  • Pleated 304 stainless steel construction for industrial filtration applications.
  • Compact, lightweight disc element suitable for compatible equipment arrangements.
  • Recleanable design supports repeated use when the element remains serviceable.
  • Pleated construction increases effective filtration area.
  • Offered in six standard dash sizes from 0.375 to 1.375 inches in outer diameter.
  • Available with different nominal and absolute filtration ratings.
  • Designed to help protect components from contamination, clogging and damage.
  • Can be considered for suitable high-temperature or corrosive applications, subject to verification.

Product Specifications

The following information is based on Norman Filter Company's F-4173 Series technical brochure. Select the appropriate dash size and micron code according to your equipment and filtration requirements.

F-4173 Series — Technical Information
Product Series F-4173
Product Type Pleated Recleanable Filter Disc
Published Material 304 Stainless Steel
Operating Pressure 6,000 PSI
Collapse Pressure 50 PSID
Outer Diameter Range 0.375" – 1.375"
Standard Dash Sizes 1 / 2 / 3 / 4 / 5 / 6
Listed Nominal Micron Ratings 2–200 Microns
Filtration Arrangement Pleated Disc
Cleaning Capability Recleanable
Product Manufacturer Norman Filter Company
Product Supplier Canglobal (M) Sdn Bhd
Standard Disc Dimensions
Dash No. A (in) B (in) C (in) D (in) Effective Area (in²)
1 0.375 0.300 0.100 0.015 0.22
2 0.500 0.420 0.150 0.020 0.66
3 0.625 0.490 0.170 0.030 1.00
4 0.750 0.615 0.170 0.030 1.60
5 1.000 0.875 0.170 0.030 3.30
6 1.375 1.250 0.170 0.030 6.60

A, B, C and D correspond to the dimensions illustrated in the manufacturer's technical drawing. Dimensions are in inches.

Available Micron Ratings
Micron Code Nominal (µm) Absolute (µm)
2X 2 10
2 2 15
5 5 20
10 10 25
20 20 40
40 40 75
75 75 100
100 100 150
200 200 300

Industrial Applications

  • Valves & Gauges: Last-chance protection for sensitive control components and orifices.
  • Gas Turbine Engines: Filtration in compatible engine-related systems.
  • Fuels & Lubricants: Contaminant removal in suitable fluid handling applications.
  • Test Stands: Filtration protection for sensitive testing equipment.
  • Aircraft Systems: Applications involving engine fuel and air systems.
  • Industrial Equipment: Refrigeration, fuel injection, electrical cooling and vacuum inlet applications.

Selection Requirements

  • Disc Dimensions: Match dash size and all relevant drawing dimensions.
  • Micron Code: Specify the required nominal and absolute filtration ratings.
  • Operating Pressure: Confirm the 6,000 PSI operating rating suits the application.
  • Differential Pressure: Consider the specified 50 PSID collapse pressure.
  • Material Compatibility: Review stainless steel compatibility with the intended fluid and conditions.
  • Installation Arrangement: Confirm disc retention, sealing, flow direction and available space.

Part Number Identification & Compatibility

Norman Filter Company's brochure uses F-4173-5-10 as an example of its part-number format, identifying the series, dash size and micron code, respectively. The discs are designed for last-chance filtration and are described as recleanable. However, suitability for reuse depends on element condition and approved cleaning procedures. Always confirm the dimensions, filtration rating, operating conditions and installation requirements before selecting a replacement element.

Frequently Asked Questions

Understanding F-4173 Series Filter Discs

What are F-4173 Series Filter Discs used for?

F-4173 Series Filter Discs provide compact last-chance filtration for suitable industrial systems. They help capture contaminants before those particles reach sensitive valves, gauges, orifices and control components.

What material is used for F-4173 filter discs?

The F-4173 technical brochure specifies 304 stainless steel construction. Material compatibility should be checked against the intended fluid, temperature and equipment requirements.

What sizes are available for the F-4173 Series?

The brochure identifies six standard dash sizes, with outer diameters ranging from 0.375 to 1.375 inches. Other dimensions must also be matched to the equipment.

Can F-4173 filter discs be cleaned and reused?

Yes. The manufacturer identifies these as recleanable pleated filter discs. The element should only be reused when it remains suitable following the relevant inspection and cleaning procedures.

How do I specify the correct filter disc?

Use the F-4173 series reference together with the required dash size and micron code. For example, F-4173-5-10 follows the manufacturer's published part-number format. Confirm compatibility with the original equipment before ordering.

Who supplies F-4173 Series Filter Discs?

Canglobal (M) Sdn Bhd supplies F-4173 Series Filter Discs from Norman Filter Company as part of its industrial filtration product offering. Canglobal has operated in industrial filtration since 2001.

Looking for F-4173 Series Filter Discs?

Contact Canglobal (M) Sdn Bhd to enquire about F-4173 Series Filter Discs, available dash sizes, micron ratings and replacement specifications. Share your existing part number, equipment details and filtration requirements so our team can assist with your product enquiry and suitable filter disc selection.



 Inquiry - F-4173 Series Filter Discs