Share:


5000 Series - Large Spin-On Filters



Industrial Spin-On Filtration

5000 Series Large Spin-On Filters

The 5000 Series Large Spin-On Filters are industrial fluid filtration products supplied by Canglobal (M) Sdn Bhd for suitable suction and return-line applications. Manufactured by Norman Filter Company, this large spin-on filter range offers a maximum operating pressure of 250 PSI, multiple port configurations and selectable filtration elements for equipment contamination control.

Designed with cast aluminium filter heads and drawn steel elements, the 5000 Series Large range provides a convenient spin-on filter configuration for compatible industrial fluid systems. Its available filter media include cellulose, microglass, stainless steel mesh and water-absorbing options, allowing buyers to select the appropriate configuration for their filtration needs.

250 PSI Maximum published operating pressure
Up to 80 GPM Published return-line head flow table maximum
-65°F to +250°F Published operating temperature range

Product Features & Filtration Benefits

Large Spin-On Filtration for Industrial Suction & Return Lines

The 5000 Series Large Spin-On Filters offer a range of head, element and bypass configurations for industrial fluid-handling equipment. Their spin-on format makes filter element replacement straightforward when the correct replacement element and servicing procedure are followed.

  • Large spin-on filter format for compatible suction and return-line systems.
  • Maximum published operating pressure of 250 PSI.
  • Operating temperature range from -65°F to +250°F.
  • Cast aluminium filter head with drawn steel filter element.
  • Published suction head flows from 15 to 32 GPM, depending on code.
  • Published return-line head flows from 40 to 80 GPM, depending on code.
  • Multiple filtration media options, including microglass, cellulose and stainless steel mesh.
  • Available bypass settings include 3, 5, 15, 25 and 50 PSI, or no bypass.

Product Specifications

The following specifications are taken from Norman Filter Company's 5000 Series Large Spin-On Filters catalogue. Actual filter capacity, port dimensions and filtration characteristics depend on the selected head and element codes.

5000 Series Large — Technical Information
Product Series 5000 Series
Product Format Large Spin-On Filters
Maximum Operating Pressure 250 PSI
Maximum Differential Pressure Without Bypass Valve 80 PSID
Operating Temperature -65°F to +250°F
Head Material Cast Aluminium
Element Material Drawn Steel
Suction Head Flow Range 15–32 GPM
Return-Line Head Flow Range 40–80 GPM
Available Filtration Media Cellulose / Microglass / Stainless Steel Mesh / Water Absorbing
Published Filter Ratings 1, 3, 6, 10, 12, 25 & 100 Micron Options
Bypass Valve Settings None / 3 / 5 / 15 / 25 / 50 PSI
Seal Compound Options Nitrile / Viton / Ethylene Propylene
Port Connection Options NPT / SAE / BSPT / Four-Bolt Mounting
Product Manufacturer Norman Filter Company
Product Supplier Canglobal (M) Sdn Bhd
Head Flow Ratings by Port Code
Port Code Suction (GPM) Return Line (GPM)
016L 15 40
16LS 15 40
16BT 15 40
16SS 15 40
1624 15 40
0020 25 70
020S 25 70
0024 32 80
024S 32 80
204B 25 70

These are the manufacturer's published head flow values, not guaranteed flow rates for every complete filter assembly. Actual performance depends on fluid conditions, filter media, loading and system pressure drop.

Selected Filter Element Codes
Element Code Filtration Rating Media Type
503 3 Micron Cellulose
503M 3 Micron Microglass
506M 6 Micron Microglass
510 10 Micron Cellulose
512M 12 Micron Microglass
525 25 Micron Cellulose
5100 100 Micron Stainless Steel Mesh
601M 1 Micron Microglass
603AQ 3 Micron Water Absorbing
610AQ 10 Micron Water Absorbing
6100 100 Micron Stainless Steel Mesh

Selected examples are shown from the manufacturer's 5000 Series Large catalogue. Additional element codes are listed in the brochure. The required element must match the selected filter head and installation.

Industrial Applications

  • Suction-Line Filtration: Filtration for compatible fluid suction systems within the published head flow ratings.
  • Return-Line Filtration: Contaminant removal from suitable return-line systems.
  • Industrial Fluid Systems: Helps address particulate contamination in equipment fluid circuits.
  • Water Contamination Control: Water-absorbing element options available for suitable applications.
  • Equipment Maintenance: Spin-on replacement format supports planned filter servicing.

Selection Requirements

  • Port Connection: Match NPT, SAE, BSPT or four-bolt mounting requirements.
  • Flow Requirements: Select a suitable suction or return-line head flow capacity.
  • Filter Media: Choose cellulose, microglass, stainless mesh or water-absorbing media as required.
  • Micron Rating: Match the filtration rating to the equipment's cleanliness requirements.
  • Bypass Setting: Confirm whether a bypass valve is required and its set pressure.
  • Seal Compound: Check fluid compatibility with Nitrile, Viton or Ethylene Propylene.
  • Installation Space: Verify head dimensions, element clearance and replacement access.

Operating Pressure & Bypass Valve Considerations

The Norman Filter catalogue specifies a maximum operating pressure of 250 PSI for the 5000 Series Large Spin-On Filters, with a warning that differential pressure must not exceed 80 PSID without a bypass valve. The available bypass configurations include no bypass, 3, 5, 15, 25 and 50 PSI settings. The manufacturer's ordering system identifies the port code, bypass setting, gauge port location, element description and seal compound. These details must be matched to the intended fluid system before installation. Do not treat the maximum head flow rating as the guaranteed performance of every filter configuration.

Frequently Asked Questions

Understanding the 5000 Series Large Spin-On Filter Range

What are the 5000 Series Large Spin-On Filters used for?

The 5000 Series Large Spin-On Filters are industrial filtration products for compatible suction and return-line fluid systems. They provide different filter head and element options to address specified contamination-control requirements.

What is the maximum operating pressure?

The manufacturer specifies a maximum operating pressure of 250 PSI. The catalogue also warns against exceeding 80 PSID differential pressure without a bypass valve.

What flow rates are available for the large filter range?

The published head flow table lists suction ratings from 15 to 32 GPM and return-line ratings from 40 to 80 GPM. These values vary by port code and do not replace application-specific performance checks.

What filter media options are available?

The manufacturer's product table includes cellulose, microglass, stainless steel mesh and water-absorbing filter elements. Available micron ratings depend on the selected element code.

Can the 5000 Series be ordered with a bypass valve?

Yes. The catalogue lists 3, 5, 15, 25 and 50 PSI bypass settings, as well as a no-bypass option. The correct setting should be selected according to the hydraulic circuit requirements.

What information is needed when ordering a replacement?

Buyers should provide the existing filter model or part number, port size, bypass setting, element code, filtration rating and seal material. Matching those specifications is more reliable than selecting by the 5000 Series name alone.

Who supplies the 5000 Series Large Spin-On Filters?

Canglobal (M) Sdn Bhd supplies the 5000 Series Large Spin-On Filters from Norman Filter Company as part of its industrial filtration offering. Canglobal has represented Norman Filter Co. since 2001.

Looking for 5000 Series Large Spin-On Filters?

Contact Canglobal (M) Sdn Bhd to enquire about 5000 Series Large Spin-On Filters, available port configurations, micron ratings, filter elements and bypass valve options. Share your existing filter part number, operating fluid, required flow rate and equipment specifications so our team can assist with product identification and suitable filtration selection.



 Inquiry - 5000 Series - Large Spin-On Filters