High Pressure Testing
High Pressure Testing
Canglobal (M) Sdn Bhd provides High Pressure Testing services for newly fabricated and in-service industrial systems, covering both low- and high-pressure test requirements. Our pressure testing services use liquid, nitrogen, helium or air, with a stated testing range from a few PSI up to 30,000 PSI. We support proof testing, leak testing and hydraulic or pneumatic testing for a wide range of industrial applications.
Pressure testing helps assess the integrity and leak-tightness of industrial systems under defined test conditions. Whether a system is newly fabricated or already in service, the appropriate testing medium, pressure level and acceptance requirements should be established through a customised pressure test programme.
Pressure Testing Services & Benefits
Hydraulic & Pneumatic Testing for Industrial System Integrity
Canglobal offers a flexible range of pressure testing services suited to different industrial requirements. Our testing scope includes proof testing and leak testing, using suitable liquid or gas testing media according to the system and agreed test procedure.
- Low-pressure and high-pressure testing services for industrial system requirements.
- Stated testing capability ranging from a few PSI up to 30,000 PSI, subject to test scope.
- Liquid-based pressure testing for appropriate hydraulic and other suitable system applications.
- Pneumatic testing options using nitrogen, helium or air as appropriate.
- Proof testing to assess system integrity under specified test conditions.
- Leak testing to assess leakage performance against agreed acceptance criteria.
- Testing services for newly fabricated installations and systems already in service.
- Customised pressure test programmes developed around specific industrial testing needs.
Service Information
Pressure testing requirements vary according to the equipment, test objective, operating conditions and applicable project criteria. Canglobal's stated service range covers both low- and high-pressure applications, with testing arrangements selected for the particular system and its intended test programme.
| Testing Medium | Testing Approach | Selection Consideration |
|---|---|---|
| Liquid | Liquid-based pressure testing. | Fluid compatibility, system pressure and test acceptance criteria. |
| Nitrogen | Pneumatic pressure testing using nitrogen. | Equipment suitability, gas handling and approved safety procedures. |
| Helium | Gas-based testing where helium is specified. | Required leak assessment method, sensitivity and test arrangement. |
| Air | Pneumatic pressure testing using air. | System suitability, pressure limits and appropriate safety controls. |
Canglobal lists liquid, nitrogen, helium and air as testing media. The appropriate medium, test pressure and detection method must be selected according to the equipment, test objective and approved procedure. The maximum stated service pressure does not apply automatically to every testing medium.
| Test Type | Primary Purpose | Project Consideration |
|---|---|---|
| Proof Testing | Assess system integrity under a specified proof pressure. | Required test pressure, procedure and acceptance conditions. |
| Leak Testing | Assess leakage performance of the tested system. | Test medium, detection method and allowable leakage criteria. |
| Hydraulic Testing | Apply suitable liquid pressure for the agreed test requirement. | Fluid compatibility, pressure control and equipment integrity. |
| Pneumatic Testing | Use an appropriate gas medium for specified pressure testing. | Test safety, gas selection, pressure control and system suitability. |
Proof and leak testing describe test objectives, while hydraulic and pneumatic testing describe approaches using liquid or gas media. The actual procedure, pressure and acceptance criteria should be confirmed in the customised test programme.
Testing Applications
- Newly Fabricated Systems: Proof or leak testing as part of fabrication and pre-service verification.
- In-Service Systems: Testing for suitable existing equipment requiring integrity assessment.
- Hydraulic Systems: Liquid-based testing for compatible industrial hydraulic equipment.
- Pneumatic Systems: Pressure or leak testing using an approved gas medium.
- Industrial Equipment: Custom testing programmes for equipment across different industries.
- System Integrity Verification: Assessment against project-specific proof or leak test criteria.
Pressure Test Planning Requirements
- Equipment Details: Identify the system, components and design pressure requirements.
- Test Objective: Confirm whether proof testing, leak testing or both are required.
- Test Pressure: Establish the applicable pressure based on equipment and project criteria.
- Testing Medium: Select suitable liquid, nitrogen, helium or air.
- System Condition: Identify newly fabricated or in-service status.
- Acceptance Criteria: Define the required test result and certification scope.
- Testing Safety: Review isolation, pressure limits, personnel protection and approved procedures.
Pressure Testing Safety & Certification Considerations
Canglobal states a pressure testing service range from a few PSI up to 30,000 PSI, with liquid, nitrogen, helium and air testing options. The maximum stated capability does not mean every system or testing medium is suitable for 30,000 PSI. The exact procedure, pressure and test medium must be assessed for the equipment. Pneumatic testing in particular can involve significant stored-energy hazards and requires appropriate engineering controls. Canglobal describes certification for proof and leak testing; the specific certificate format, recognised standards and acceptance criteria should be confirmed for each project.
Frequently Asked Questions
Understanding High Pressure Testing Services
What pressure testing services does Canglobal offer?
Canglobal offers low- and high-pressure testing services, including proof testing, leak testing and hydraulic or pneumatic testing for suitable industrial systems.
What is the maximum testing pressure available?
Canglobal states a pressure testing range from a few PSI up to 30,000 PSI. The applicable test pressure depends on the equipment, testing medium and project requirements.
Which testing media can be used?
Canglobal identifies liquid, nitrogen, helium and air as available pressure testing media. The selected medium depends on the test objective and system suitability.
What is the difference between proof testing and leak testing?
Proof testing assesses whether a system meets defined integrity requirements under a specified test pressure. Leak testing assesses leakage performance against the agreed acceptance criteria. Both require a suitable approved test procedure.
Can Canglobal test newly fabricated and in-service systems?
Yes. Canglobal states that its proof and leak testing services cover newly fabricated systems and equipment already in service, subject to the required testing scope.
Does Canglobal provide pressure test certification?
Canglobal states that certification is provided for proof and leak testing. The specific certificate requirements, test acceptance criteria and applicable standards should be confirmed before testing.
Can a customised pressure test programme be arranged?
Yes. Canglobal invites customers to discuss their requirements for a customised pressure test programme. The testing plan should be based on the equipment, pressure range, medium and intended testing objective.
What information should I provide for a pressure testing enquiry?
Share the equipment description, design and required test pressure, preferred testing medium, system condition, proof or leak test requirements and any relevant certification criteria.
Need Professional High Pressure Testing?
Contact Canglobal (M) Sdn Bhd to discuss your industrial pressure testing needs. Whether you require proof testing, leak testing, hydraulic testing or pneumatic testing for a newly fabricated or in-service system, our team can review your pressure range, testing medium, equipment requirements and certification needs to discuss a customised pressure test programme for your application.
Make Appointment